Create a 2D floor

Create a floor plan for a $456 \text{ m}^2$ lot. The lot is on a corner, where the 'longest' side measures $33 \text{ m}$ and the 'interior' width measures $14 \text{ m}$. In this plan, I would like a very spacious kitchen integrated with the living room, where the living room wall facing the $33 \text{ m}$ extension is entirely glass so it can be opened and integrated with the pool and gourmet area (outdoor kitchen/dining).On one side of the living room, I would like a small hallway that leads to two suites opposite one another, one of which should be larger to also accommodate a walk-in closet.On the other side of this central common area/living room, another hallway should lead to two more rooms: an office opposite a TV room, with a powder room (lavabo) at the end of the hallway.In addition, I would like a small service area (laundry room) to be created in the 'back' part of the lot, with an entrance from the living room and space for a pantry.

Design a luxury multi-level residential home with the following layout: Ground Floor: Grand foyer with double-height ceiling and clerestory glazing. Formal living room with gas fireplace and a hidden integrated bar behind sliding drapes. Dining room with 12-seat extendable table adjacent to a large kitchen. Kitchen includes island seating for 4, walk-in pantry, and a butler’s window to the dining room. Family lounge with sectional sofas, gas fireplace, and a wall of sliding doors opening to a garden terrace. Music studio with acoustic wall panels, a vocal booth, and backlit sheet-music display. Quiet wing includes: Prayer room (fully soundproof, with flush skylight and meditation cushions). Study (built-in desks, floor-to-ceiling bookshelves). Office (next to study, across from prayer room, near mudroom and elevator). Mudroom and laundry with garden access. Guest powder room. Elevator connecting all floors. First Floor: Master suite: walk-in closet, private balcony overlooking the garden, ensuite with tub and shower. Child Suite A (girl twin): shower-only bathroom, desk nook, front garden view. Child Suite B (boy twin): shower-only, built-in shelves, reading corner. Child Suite C (boy): shower-only, cozy reading nook, south-facing window. Child Suite D (girl): shower-only, window seat with treetop canopy view. Upper family lounge over stair core: glass balustrade overlooks foyer, dormer daylight, built-in bookshelves and seating alcove. Rooftop: Infinity pool on reinforced terrace above the Family Wing. South-west orientation to capture afternoon sun and garden views. Attic: Access via discrete staircase off upper landing. Use for hobby area, storage, or guest nook. Basement: Infinity-edge cinema with tiered seating and Dolby surround. Spa zone with sauna, steam room, and massage room. Gym with mirrored walls, rubber flooring, cardio and weights. Wine cellar and cold storage pantry.

This is the description of the plan that we intend to have. It’s a double story house that is a contemporary modern approach. The top floor will have three bedrooms and amongst those three bedrooms the main one will have a double walk in closet and a tub in the shower the rest of the rooms will have a shower then and on top of that there is going to be a small lounge area on the top floor then on the bottom floor, there’s going to be a kitchen dining and the lounge that I am going to have an open area approach and there is also going to be one bedroom which we have an in suit and there is also going to be a separate toilet for visitors. There is also going to be an office a calorie, and there’s also going to be a veranda which is going to be an extended part of the backside of the house, which will be part of the dining and will be separated by a glass door. The Verrado will also be under an enclosed structure away by it would be closed by Glass Doors that are slide, or that can be folded and allow needs to be opened or closed fully for the specifics the height of the hi Ruth that will be covering the dining and lounge and the foyer is going to be about 18 feet plus or minus and more than staircase to compliment. There is not going to be a garage. Create a plan for the upstairs and downstairs2

“Create a detailed tiny house design. 1. Floor Plan Requirements: Size: 400–500 sq ft Open-concept living room + kitchen Full bathroom with shower Bedroom on main floor (no loft) Large windows for natural light Space-efficient built-ins and storage Include exact measurements for each room Show furniture placement Show entry door locations, window placement, and flow Use clean, modern, minimal style 2. Exterior Render Requirements: Modern tiny home with wood + black metal accents Large front windows Slanted or flat modern roof Small porch or deck Display front view, side view, and aerial view Realistic lighting and real-world materials Clean landscaping with gravel, grass, and a small walkway Generate: One detailed floor plan Three realistic exterior images One interior 3D rendering from the living room looking into the kitchen Ultra-realistic, architectural-grade quality

Modern two-story house design on a 12 m × 25 m lot (300 m²). The first floor should be around 70 m², and the second floor around 60 m². The design must include: • Front setback of 6 m for a two-car garage and garden. • Backyard of 10 m with a terrace and green area. • First floor: open-concept living room, dining room, and kitchen, one bedroom, one full bathroom, laundry area. • Second floor: master bedroom 4×4 m with ensuite bathroom and walk-in closet, one secondary bedroom for a queen bed, one shared bathroom, and a small living room. • Modern façade with large windows and light-colored materials. • Respect side setbacks (1.5 m ground floor, 3 m upper floor). Generate a floor plan and exterior render that looks cozy, elegant, and well-lit.

Luxurious Real Estate Office Floor Plan Overview The following is a detailed CAD drawing description of a luxurious real estate office floor plan, spanning 150 square meters. The office layout is designed to optimize functionality and elegance, making it an ideal workspace for professionals. Floor Plan Specifications Area: 150 square meters Dimensions: 15 meters in width x 10 meters in length Layout: Reception Area Offices Meeting Rooms Stairs to Mezzanine Level Detailed Layout 1. Reception Area Location: Upon entering, the reception area is the first point of interaction, located at the front of the office. Size: Approximately 20 square meters (5 meters x 4 meters). Features: Reception Desk: A sleek, modern design made of high-quality wood or glass, positioned to face the entrance. 3D Model Project Proposal Stand: A visually appealing stand for showcasing projects, located near the reception desk to engage visitors. Seating Area: A small seating area with two to three chairs for waiting clients. 2. Offices Number: 4 offices Size: Two large offices: 15 square meters each (5 meters x 3 meters) Two small offices: 10 square meters each (5 meters x 2 meters) Features: Large offices: Equipped with a large wooden desk, a comfortable chair, bookshelves, and a small meeting table with two chairs. Small offices: Fitted with a compact desk, a chair, and a bookshelf. 3. Meeting Rooms Number: 2 meeting rooms Size: Large meeting room: 20 square meters (5 meters x 4 meters) Small meeting room: 12 square meters (4 meters x 3 meters) Features: Equipped with large wooden tables, comfortable chairs, and presentation equipment. The large meeting room includes a projector screen and a whiteboard. 4. Stairs to Mezzanine Level Location: Positioned at the back of the office, leading to the mezzanine level which could serve as an additional workspace, storage, or a quiet area. Design: Elegant and sturdy, with a glass or metal railing. Mezzanine Level Area: Approximately 75 square meters (inherited from the total area, used efficiently for vertical expansion). Potential Use: Additional office space Storage area Quiet room for focused work Design Considerations Lighting: Ample natural light is prioritized, supplemented by high-quality artificial lighting. Materials: High-end materials such as glass, polished wood, and metal are used for a luxurious feel. Color Scheme: A professional palette with shades of white, gray, and wood tones. Conclusion This luxurious real estate office floor plan is designed to provide a sophisticated and productive work environment. With a well-thought-out layout, high-quality materials, and attention to detail, it meets the needs of professionals while making a statement about the company's commitment to excellence. CAD Drawing Representation The CAD drawing would accurately represent the dimensions and layout described, incorporating the following elements: Scale: 1:100 or 1:50 for detailed views. Symbols: Standard architectural symbols for doors, windows, furniture, and other features. Views: Include floor plan, elevations, and sections as necessary for a comprehensive understanding. By following these specifications, the CAD drawing will serve as a precise blueprint for constructing a luxurious and functional real estate office.

Luxurious Real Estate Office Floor Plan Overview The following is a detailed CAD drawing description of a luxurious real estate office floor plan, spanning 150 square meters. The office layout is designed to optimize functionality and elegance, making it an ideal workspace for professionals. Floor Plan Specifications Area: 150 square meters Dimensions: 15 meters in width x 10 meters in length Layout: Reception Area Offices Meeting Rooms Stairs to Mezzanine Level Detailed Layout 1. Reception Area Location: Upon entering, the reception area is the first point of interaction, located at the front of the office. Size: Approximately 20 square meters (5 meters x 4 meters). Features: Reception Desk: A sleek, modern design made of high-quality wood or glass, positioned to face the entrance. 3D Model Project Proposal Stand: A visually appealing stand for showcasing projects, located near the reception desk to engage visitors. Seating Area: A small seating area with two to three chairs for waiting clients. 2. Offices Number: 4 offices Size: Two large offices: 15 square meters each (5 meters x 3 meters) Two small offices: 10 square meters each (5 meters x 2 meters) Features: Large offices: Equipped with a large wooden desk, a comfortable chair, bookshelves, and a small meeting table with two chairs. Small offices: Fitted with a compact desk, a chair, and a bookshelf. 3. Meeting Rooms Number: 2 meeting rooms Size: Large meeting room: 20 square meters (5 meters x 4 meters) Small meeting room: 12 square meters (4 meters x 3 meters) Features: Equipped with large wooden tables, comfortable chairs, and presentation equipment. The large meeting room includes a projector screen and a whiteboard. 4. Stairs to Mezzanine Level Location: Positioned at the back of the office, leading to the mezzanine level which could serve as an additional workspace, storage, or a quiet area. Design: Elegant and sturdy, with a glass or metal railing. Mezzanine Level Area: Approximately 75 square meters (inherited from the total area, used efficiently for vertical expansion). Potential Use: Additional office space Storage area Quiet room for focused work Design Considerations Lighting: Ample natural light is prioritized, supplemented by high-quality artificial lighting. Materials: High-end materials such as glass, polished wood, and metal are used for a luxurious feel. Color Scheme: A professional palette with shades of white, gray, and wood tones. Conclusion This luxurious real estate office floor plan is designed to provide a sophisticated and productive work environment. With a well-thought-out layout, high-quality materials, and attention to detail, it meets the needs of professionals while making a statement about the company's commitment to excellence. CAD Drawing Representation The CAD drawing would accurately represent the dimensions and layout described, incorporating the following elements: Scale: 1:100 or 1:50 for detailed views. Symbols: Standard architectural symbols for doors, windows, furniture, and other features. Views: Include floor plan, elevations, and sections as necessary for a comprehensive understanding. By following these specifications, the CAD drawing will serve as a precise blueprint for constructing a luxurious and functional real estate office.

Create a 2D architectural plan for a two-story country house, with a maximum of 300 m² of construction, in a modern, soft industrial style. The ground floor should include: a 35 m² double-height living room overlooking the pool, a 15 m² integrated dining room, a large open-plan kitchen with an island (20-25 m²), a medium-sized pantry (5-6 m²), a 40-45 m² master bedroom with exterior views, a spacious bathroom and a large dressing room, a 12-15 m² gym, a guest bathroom, an 8-10 m² laundry area with a cupboard, a three-car garage with a 6-8 m² storage room, a 25-30 m² barbecue area, and a 3 x 5 meter swimming pool located in front of the living room. It should include a metal staircase with floating wooden treads in an industrial style (without visible supports). The upper floor should include three additional bedrooms: two 12 m² bedrooms with built-in wardrobes and a shared bathroom, and one 12 m² bedroom with a small en-suite bathroom (4 m²). It should also include an open-plan living room or study of 12 to 15 m² with views of the double-height ceiling. All bedrooms should have views of the surrounding countryside or the swimming pool. The layout should be functional and realistic, considering a country house on a 1000 m² plot.

Create a 2D architectural plan for a two-story country house, with a maximum of 300 m² of construction, in a modern, soft industrial style. The ground floor should include: a 35 m² double-height living room overlooking the pool, a 15 m² integrated dining room, a large open-plan kitchen with an island (20-25 m²), a medium-sized pantry (5-6 m²), a 40-45 m² master bedroom with exterior views, a spacious bathroom and a large dressing room, a 12-15 m² gym, a guest bathroom, an 8-10 m² laundry area with a cupboard, a three-car garage with a 6-8 m² storage room, a 25-30 m² barbecue area, and a 3 x 5 meter swimming pool located in front of the living room. It should include a metal staircase with floating wooden treads in an industrial style (without visible supports). The upper floor should include three additional bedrooms: two 12 m² bedrooms with built-in wardrobes and a shared bathroom, and one 12 m² bedroom with a small en-suite bathroom (4 m²). It should also include an open-plan living room or study of 12 to 15 m² with views of the double-height ceiling. All bedrooms should have views of the surrounding countryside or the swimming pool. The layout should be functional and realistic, considering a country house on a 1000 m² plot.

Can you create me 2 separate house plans. one for upstairs and one for downstairs.  on the upstairs floor plan i would like: the master bedroom to be quite big as to fit a double bed and to have extra space aswell as to have a joined en-suite that can fit a large bath and a walk in shower, bathroom and sink and a joined dressing room.  the second bedroom to be large enough for a double bed with extra space aswell as to have an en-suite attached.  in the third bedroom i would like it large enough to fit a double bed with extra space.  in the fourth bedroom i would like it to be large enough to fit a double bed with additional space.  in the fifth bedroom i would like to have enough space for a double bed with extra space.  i would like a shared bathroom that is large enough to fit a walk in shower and a large bath, a toilet and a large counter with a sink.  on the downstairs floor plan i would like: i would like a shared bathroom that is large enough for a walk in shower and a toilet and sink.  an office that can fit a large desk and large filing cabinet. a large kitchen to fit a island and appropriate kitchen appliances and furniture and countertops.  a large dining room to fit a large table with 8 chairs.  a lounge to fit a large sofa, 2 small arm chairs, a coffee table, a bookshelf and a fireplace.  a extra room that is large enough to have space for all of my projects with adequate storage. 

Can you create me 2 separate house plans. one for upstairs and one for downstairs.  on the upstairs floor plan i would like: the master bedroom to be quite big as to fit a double bed and to have extra space aswell as to have a joined en-suite that can fit a large bath and a walk in shower, bathroom and sink and a joined dressing room.  the second bedroom to be large enough for a double bed with extra space aswell as to have an en-suite attached.  in the third bedroom i would like it large enough to fit a double bed with extra space.  in the fourth bedroom i would like it to be large enough to fit a double bed with additional space.  in the fifth bedroom i would like to have enough space for a double bed with extra space.  i would like a shared bathroom that is large enough to fit a walk in shower and a large bath, a toilet and a large counter with a sink.  on the downstairs floor plan i would like: i would like a shared bathroom that is large enough for a walk in shower and a toilet and sink.  an office that can fit a large desk and large filing cabinet. a large kitchen to fit a island and appropriate kitchen appliances and furniture and countertops.  a large dining room to fit a large table with 8 chairs.  a lounge to fit a large sofa, 2 small arm chairs, a coffee table, a bookshelf and a fireplace.  a extra room that is large enough to have space for all of my projects with adequate storage. 

Neon ufo flying saucer hovering low over a street in downtown Eugene, Oregon, on a dark, wet, foggy night; the points of light from the flying saucer, the street lamps, and the stores' signs all glow brightly on an otherwise dark, foggy, and wet evening.   the composition of the image is of a street view; the perspective is centered in the road, looking down the street, as if the viewer is suspended in the air at the height of approximately one and a half to two stories above the street level. it is on dark and damp misty evening, on a deserted downtown avenue, with the street and city lights glowing all around and in the distance. the style is a photograph-like, nearly realistic modern anime-style rendering. with medium contrast and high definition of the buildings and objects in the foreground, but the definition gradually fades into the haze of the fog further down the road, looking into the distance. the air is foggy, the street payment is wet, like it recently stopped raining.  The Tint of the picture is a blue-green, dark but features on the buildings are still visible. the street lights are on poles that line both sides of the street and are vintage looking, the street light lamps glow an eerie pale yellow color (with a hint of light green), and shed soft light on the things around them, and cast light on the texture of the exteriors of the buildings. this gives the exteriors high contrast with the light and dark light. there are many points of city lights lining the street, from the foreground to the distant background, soft orbs, that are still visible through the fog.  the air is foggy, the street payment is wet, like it recently stopped raining. little bits of light reflect off of the wet surfaces.  the street is narrow, with stores and restaurants on both sides; hanging from the sides if the buildings are illuminated signs, various sizes and shapes, most but not all are vertically aligned and rectangular; some are circles, some are squares, some are more abstract shapes; some are logos. they hang placed at a height that starts from the top of the first story, and various heights above that. some are mounted flat on the exterior buildings' wall, some protrude perpendicularly from the building. there is at least one or two on the rooftops.  they glow with rich yellow light, neon, and occasionally tangerine orange, white, or green. the letters are bold, and stand out.  the stores have illuminated horizontally aligned panel-style signage above their windows, that vary in color, and about 2/3 of which are turned on. occasionally their will be small neon fixtures in the stores' windows. there are occasional trees that line the sides of the street, not many but a few; that appear like dark shapes with minimal detail and light reflection; the ones closer to the background are just silhouettes fading into the fog. in the very far, far background, the dark outline of the small mountain that  overlooks Eugene, Oregon (known as Spencers Butte) is visible; appearing faintly but shape is unmistakably part of the landscape.    the single flying saucer is hovering over the street, just a few dozen feet above the height of the rooftops. The perspective is more of the undercarriage than the top side, because of the angle in the viewers line of sight, but the body and the top side are also visible too.  The flyer saucer appears to be antique and vintage-looking. shaped like a bell, but with more sections. The body shape is similar to that of Darth Vader’s helmet from Star Wars.  Looking at the undercarriage from the underneath perspective, there is a  large grill section, shaped like a ring, recessed up into the saucer, that looks like it has well-defined gills similar to that of a mushroom. this part emanates an alien-like green glow from within the inside of the grill. in the center is an extruded barrel-shaped ring, short in height but wide in width, and it has a porthole in the center, that is open and glowing. the porthole is for shooting energy beams. the body of the flying saucer is covered in rings of neon lights, as well as rows of round lights in various sizes. there are also patterns of other shapes of lights on the exterior of the craft as well. most of the lights on the flying saucer are colored neon green, but there is also some neon orange, some bright pink, and some electric blue. The lights have a soft-edged glow from the fog in the air.  The edge of the body and undercarriage of the flying saucer has several external speakers on it, placed into two rows, each of which consists of either large or small speakers. the details of the flying saucer are clearly defined, the contrast is high, and visible from the street. the flying saucer is the most prominent object in the picture.   

Neon ufo flying saucer hovering low over downtown Eugene, Oregon;   the image is of a street view; the perspective is centered in the road, looking down the street, as if the viewer is suspended in the air at the height of approximately one and a half to two stories above the street level. it is on dark and damp misty evening, on a deserted downtown avenue, with the street and city lights glowing all around and in the distance. the style is a photograph-like, nearly realistic modern anime-style rendering. with medium contrast and high definition of the buildings and objects in the foreground, but the definition gradually fades into the haze of the fog further down the road, looking into the distance. the air is foggy, the street payment is wet, like it recently stopped raining.  The Tint of the picture is a blue-green, dark but features on the buildings are still visible. the street lights are on poles that line both sides of the street and are vintage looking, the street light lamps glow an eerie pale yellow color (with a hint of light green), and shed soft light on the things around them, and cast light on the texture of the exteriors of the buildings. this gives the exteriors high contrast with the light and dark light. there are many points of city lights lining the street, from the foreground to the distant background, soft orbs, that are still visible through the fog.  the air is foggy, the street payment is wet, like it recently stopped raining. little bits of light reflect off of the wet surfaces.  the street is narrow, with stores and restaurants on both sides; hanging from the sides if the buildings are illuminated signs, various sizes and shapes, most but not all are vertically aligned and rectangular; some are circles, some are squares, some are more abstract shapes; some are logos. they hang placed at a height that starts from the top of the first story, and various heights above that. some are mounted flat on the exterior buildings' wall, some protrude perpendicularly from the building. there is at least one or two on the rooftops.  they glow with rich yellow light, neon, and occasionally tangerine orange, white, or green. the letters are bold, and stand out.  the stores have illuminated horizontally aligned panel-style signage above their windows, that vary in color, and about 2/3 of which are turned on. occasionally their will be small neon fixtures in the stores' windows. there are occasional trees that line the sides of the street, not many but a few; that appear like dark shapes with minimal detail and light reflection; the ones closer to the background are just silhouettes fading into the fog. in the very far, far background, the dark outline of the small mountain that  overlooks Eugene, Oregon (known as Spencers Butte) is visible; appearing faintly but shape is unmistakably part of the landscape.    the single flying saucer is hovering over the street, just a few dozen feet above the height of the rooftops. The perspective is more of the undercarriage than the top side, because of the angle in the viewers line of sight, but the body and the top side are also visible too.  The flyer saucer appears to be antique and vintage-looking. shaped like a bell, but with more sections. The body shape is similar to that of Darth Vader’s helmet from Star Wars.  Looking at the undercarriage from the underneath perspective, there is a  large grill section, shaped like a ring, recessed up into the saucer, that looks like it has well-defined gills similar to that of a mushroom. this part emanates an alien-like green glow from within the inside of the grill. in the center is an extruded barrel-shaped ring, short in height but wide in width, and it has a porthole in the center, that is open and glowing. the porthole is for shooting energy beams. the body of the flying saucer is covered in rings of neon lights, as well as rows of round lights in various sizes. there are also patterns of other shapes of lights on the exterior of the craft as well. most of the lights on the flying saucer are colored neon green, but there is also some neon orange, some bright pink, and some electric blue. The lights have a soft-edged glow from the fog in the air.  The edge of the body and undercarriage of the flying saucer has several external speakers on it, placed into two rows, each of which consists of either large or small speakers. the details of the flying saucer are clearly defined, the contrast is high, and visible from the street. the flying saucer is the most prominent object in the picture.   

Neon ufo flying saucer hovering low over a street in downtown Eugene, Oregon, on a dark, wet, foggy night; the points of light from the flying saucer, the street lamps, and the stores' signs all glow brightly on an otherwise dark, foggy, and wet evening.   the composition of the image is of a street view; the perspective is centered in the road, looking down the street, as if the viewer is suspended in the air at the height of approximately one and a half to two stories above the street level. it is on dark and damp misty evening, on a deserted downtown avenue, with the street and city lights glowing all around and in the distance. the style is a photograph-like, nearly realistic modern anime-style rendering. with medium contrast and high definition of the buildings and objects in the foreground, but the definition gradually fades into the haze of the fog further down the road, looking into the distance. the air is foggy, the street payment is wet, like it recently stopped raining.  The Tint of the picture is a blue-green, dark but features on the buildings are still visible. the street lights are on poles that line both sides of the street and are vintage looking, the street light lamps glow an eerie pale yellow color (with a hint of light green), and shed soft light on the things around them, and cast light on the texture of the exteriors of the buildings. this gives the exteriors high contrast with the light and dark light. there are many points of city lights lining the street, from the foreground to the distant background, soft orbs, that are still visible through the fog.  the air is foggy, the street payment is wet, like it recently stopped raining. little bits of light reflect off of the wet surfaces.  the street is narrow, with stores and restaurants on both sides; hanging from the sides if the buildings are illuminated signs, various sizes and shapes, most but not all are vertically aligned and rectangular; some are circles, some are squares, some are more abstract shapes; some are logos. they hang placed at a height that starts from the top of the first story, and various heights above that. some are mounted flat on the exterior buildings' wall, some protrude perpendicularly from the building. there is at least one or two on the rooftops.  they glow with rich yellow light, neon, and occasionally tangerine orange, white, or green. the letters are bold, and stand out.  the stores have illuminated horizontally aligned panel-style signage above their windows, that vary in color, and about 2/3 of which are turned on. occasionally their will be small neon fixtures in the stores' windows. there are occasional trees that line the sides of the street, not many but a few; that appear like dark shapes with minimal detail and light reflection; the ones closer to the background are just silhouettes fading into the fog. in the very far, far background, the dark outline of the small mountain that  overlooks Eugene, Oregon (known as Spencers Butte) is visible; appearing faintly but shape is unmistakably part of the landscape.    the single flying saucer is hovering over the street, just a few dozen feet above the height of the rooftops. The perspective is more of the undercarriage than the top side, because of the angle in the viewers line of sight, but the body and the top side are also visible too.  The flyer saucer appears to be antique and vintage-looking. shaped like a bell, but with more sections. The body shape is similar to that of Darth Vader’s helmet from Star Wars.  Looking at the undercarriage from the underneath perspective, there is a  large grill section, shaped like a ring, recessed up into the saucer, that looks like it has well-defined gills similar to that of a mushroom. this part emanates an alien-like green glow from within the inside of the grill. in the center is an extruded barrel-shaped ring, short in height but wide in width, and it has a porthole in the center, that is open and glowing. the porthole is for shooting energy beams. the body of the flying saucer is covered in rings of neon lights, as well as rows of round lights in various sizes. there are also patterns of other shapes of lights on the exterior of the craft as well. most of the lights on the flying saucer are colored neon green, but there is also some neon orange, some bright pink, and some electric blue. The lights have a soft-edged glow from the fog in the air.  The edge of the body and undercarriage of the flying saucer has several external speakers on it, placed into two rows, each of which consists of either large or small speakers. the details of the flying saucer are clearly defined, the contrast is high, and visible from the street. the flying saucer is the most prominent object in the picture.   

Create a 2,000 sq foot floor plan for a primary care office with: 2 exam rooms, 1 lab, 1 kitchenette, a reception area with waiting room, 1 large executive office, 1 small nurse office, 1 phlebtomy room, and 2 bathrooms adjacent to one another. Windows are south facing / entrance on north side of suite; executive offices with large windows are west facing, bathrooms and exam rooms on the East wall. All exam rooms, lab room, and phlebtomty room should contain a sink.

Create a 2,000 sq ft floor plan for a primary care office with walls for 2 exam rooms, 1 lab, 1 kitchenette, a reception area with waiting room, 1 large executive office, 1 small nurse office, 1 phlebtomy room. Windows are south facing / entrance on north side of suite; executive offices with large windows are west facing. Exam rooms should be on the east wall all containing a sink including the phlebtomy room and lab room.